When working with our clients in the Aerospace, Defense and Advanced Manufacturing industries there is absolutely no margin for error.
AMS 2488 (Anodized Titanium) is the Aerospace industry standard spec for anodized titanium. The specification includes two types (Type 1 and Type 2).
Benefits of AMS 2488 Titanium Anodize
Electrically Passive Surface
Corrosion Resistance
Low Cost
Easy Color Application for Color Coding/Company Branding
Biocompatible
Reduced risk of Galling
Abrasion Resistance
And more!
Technical Notes for AMS-2488
Purchase order should include as much of the following as possible
AMS2488E
Basis metal to be anodized
Special features, geometry or processing present on parts that require special attention by the anodizing processor
Periodic testing frequency and sample quantity
Whether approval is based on approval of process/control factors or sample part
Quantity of pieces to be plated
Permissible electrical contact locations
About
This specification establishes the engineering requirements for producing an anodic coating on titanium and titanium alloys and the properties of the coating.
Application
These coatings have been used typically as a lubricating and anti-galling coating for elevated temperature forming, as an isolating film for increased resistance to galvanic corrosion, to provide improved wear resistance and as a pretreatment for the application of solid film lubricants, but usage is not limited to such applications.
AMS-2488 Classification
Coatings are classified by end-product applications, as follows:
Type 1 - As a coating for elevated-temperature forming. Anodizing shall produce a dimensional increase of 0.0002 to 0.0004 inch (5 to 10 µm) per surface, determined by measuring the same location on parts or specimens before and after anodizing using a micrometer accurate to 0.0001 inch (2.5 µm), by eddy current measurements in accordance with ASTM B244, or other method acceptable to purchaser. If specimens are used, they shall be fabricated from the same alloy and condition as the parts and shall be processed with the parts represented.
Type 2 - As an anti-galling coating without additional lubrication or as a pretreatment for improving adherence of film lubricants and in application where increased resistance to galvanic corrosion is required. Shall be such that there is no measurable dimensional change when measured with a micrometer accurate to 0.0001 inch (2.5 µm).
Type 2 shall be furnished unless Type 1 is specified.
Join AOTCO at D2P Mohegan Sun | Southern New England
Spring has arrived to New England and that means it is time to get ready for fresh lobstah, the Boston Marathon, and fun at the Southern New England Design-2-Part Show....
AOTCO President Speaks At Harvard Business School Association
During a recent roundtable discussion at the Harvard Business School Association of Boston event, AOTCO's President, Matthew Smith, shared the remarkable journey of the...
Looking to secure your supply chain's NADCAP plating and anodizing services to drive innovation? Join AOTCO Metal Finishing at MRO Americas in Chicago!
Electroplating is a process by which one metal is deposited onto a base metal (substrate). These deposited metals offer a variety of benefits including thermal and electrical conductivity, corrosion resistance and more. AOTCO electroplates a wide variety of both standard and exotic metals.
Sometimes called a “conversion coating” Anodizing is an electrolytic process in which an oxide (anodic) layer is chemically built on the surface of the substrate material, providing anti-corrosion and other benefits. AOTCO offers, Type I, Type 2, Type 3 and Titanium anodizing services.
Passivation is a term for a variety if processes that make a metal (most commonly stainless steel) or other substance unreactive, or passive, by altering the surface layer or coating the surface with a thin inert layer. AOTCO performs both citric and black oxide passivation techniques to a range of specifications.
AOTCO plates on a wide variety of Common, Exotic and Non-Metallic substrates, bringing exceptional expertise to magnesium, titanium, beryllium, BeCu, TeCu, tungsten and more. In some cases we pass as high as 450 degrees celsius, allowing for high temperature soldering, brazing, or post machining operations after plating.
Pre-Process: In addition to offering both mechanical & chemical cleaning options, AOTCO specializes in creating solutions for complicated, difficult and tight-tolerance masking challenges. Post-Process: For clients with specialized needs AOTCO offers laser marking and engraving options, including color change caused by chemical or molecular changes, charring, foaming, melting, ablation, and more.
Part of our cornerstone goal of building long-term, collaborative & solution-oriented partnerships, AOTCO will devote reserved physical and human resource capacity for our clients with long-term finishing and deadline requirements. For these partnerships our commitment is that AOTCO manages the process, while YOU control the results.
