If touch-up is permitted for mechanically damaged areas.
Colorless coatings, if required.
If touch-up is permitted for contact marks.
Omit the paint adhesion test, if permitted.
If electrical resistance testing is required for class 3 coatings.
When electrical resistance testing is required, specify the required resistance values, frequency of testing, and test method.
Alloy and temper of the process control test specimens
Paint finish system for treated parts, if applicable.
Quantity required.
Sampling plan.
Lot size.
Types
Type I – Compositions containing hexavalent chromium
Type II – Compositions containing no hexavalent chromium (RoHS Compliant)
Note – If no material type is specified, type I will be used.
Classes
Class 1A – For maximum protection against corrosion on unpainted items, and increased adhesion on painted items. Used on tanks, tubing, and component structures where only exterior protection is required.
Class 3 – For protection against corrosion where low electrical resistance is required.
Cool fall weather has arrived to Philadelphia and that means it is time to get ready for cheesesteaks, hoagies, Philly soft pretzels, and fun at the Mid-Atlantic...
Join AOTCO at Hydrogen Americas Summit 2023 in Washington, D.C.
Join AOTCO Metal Finishing at the Hydrogen Americas Summit 2023 in Washington, D.C. Stop by our booth, A02, on October 2-3 to learn about our clean energy solutions.
Fall has arrived to New England. That means it is time to get ready for apple cider, donuts and fun at the New England Design-2-Part Show. Join AOTCO Metal Finishing at...
Electroplating is a process by which one metal is deposited onto a base metal (substrate). These deposited metals offer a variety of benefits including thermal and electrical conductivity, corrosion resistance and more. AOTCO electroplates a wide variety of both standard and exotic metals.
Sometimes called a “conversion coating” Anodizing is an electrolytic process in which an oxide (anodic) layer is chemically built on the surface of the substrate material, providing anti-corrosion and other benefits. AOTCO offers, Type I, Type 2, Type 3 and Titanium anodizing services.
Passivation is a term for a variety if processes that make a metal (most commonly stainless steel) or other substance unreactive, or passive, by altering the surface layer or coating the surface with a thin inert layer. AOTCO performs both citric and black oxide passivation techniques to a range of specifications.
AOTCO plates on a wide variety of Common, Exotic and Non-Metallic substrates, bringing exceptional expertise to magnesium, titanium, beryllium, BeCu, TeCu, tungsten and more. In some cases we pass as high as 450 degrees celsius, allowing for high temperature soldering, brazing, or post machining operations after plating.
Pre-Process: In addition to offering both mechanical & chemical cleaning options, AOTCO specializes in creating solutions for complicated, difficult and tight-tolerance masking challenges. Post-Process: For clients with specialized needs AOTCO offers laser marking and engraving options, including color change caused by chemical or molecular changes, charring, foaming, melting, ablation, and more.
Part of our cornerstone goal of building long-term, collaborative & solution-oriented partnerships, AOTCO will devote reserved physical and human resource capacity for our clients with long-term finishing and deadline requirements. For these partnerships our commitment is that AOTCO manages the process, while YOU control the results.
