AMS-QQ-P-35 focuses on cleaning/descaling of stainless-steel parts for use of austenitic, ferritic, martensitic, and precipitation hardening corrosion resistant steels.
ALL customer drawings MUST call for one of the following types
Type II – Medium temperature nitric acid solution with sodium dichromate additive
Type II – Medium temperature nitric acid solution with sodium dichromate additive
Type VI – Low temperature nitric acid solution
Type VII – Medium temperature nitric acid solution
Type VIII – medium temperature high concentration nitric acid solution
To request information pertaining to your base material’s compatibility w/ each type, please inquire here.
Required testing: EITHER Water Immersion OR High Humidity
Optional/Additional testing: Salt Spray, Copper Sulfate (can be request in lieu of required)
AOTCO Metal Finishing, a national leader in specialty finishing services, announced its strategic acquisition of Connecticut-based Modern Metal Finishing (MMF), further...
Electroplating is a process by which one metal is deposited onto a base metal (substrate). These deposited metals offer a variety of benefits including thermal and electrical conductivity, corrosion resistance and more. AOTCO electroplates a wide variety of both standard and exotic metals.
Sometimes called a “conversion coating” Anodizing is an electrolytic process in which an oxide (anodic) layer is chemically built on the surface of the substrate material, providing anti-corrosion and other benefits. AOTCO offers, Type I, Type 2, Type 3 and Titanium anodizing services.
Passivation is a term for a variety if processes that make a metal (most commonly stainless steel) or other substance unreactive, or passive, by altering the surface layer or coating the surface with a thin inert layer. AOTCO performs both citric and black oxide passivation techniques to a range of specifications.
AOTCO plates on a wide variety of Common, Exotic and Non-Metallic substrates, bringing exceptional expertise to magnesium, titanium, beryllium, BeCu, TeCu, tungsten and more. In some cases we pass as high as 450 degrees celsius, allowing for high temperature soldering, brazing, or post machining operations after plating.
Pre-Process: In addition to offering both mechanical & chemical cleaning options, AOTCO specializes in creating solutions for complicated, difficult and tight-tolerance masking challenges. Post-Process: For clients with specialized needs AOTCO offers laser marking and engraving options, including color change caused by chemical or molecular changes, charring, foaming, melting, ablation, and more.
Part of our cornerstone goal of building long-term, collaborative & solution-oriented partnerships, AOTCO will devote reserved physical and human resource capacity for our clients with long-term finishing and deadline requirements. For these partnerships our commitment is that AOTCO manages the process, while YOU control the results.
